R&S AREG800A, Руководство пользователя

Страница: 17 / 411

Getting started
R&S
®
AREG800A
17 User Manual 1179.3615.02 ─ 01
3 Getting started
3.1 Preparing for use
Here, you can find basic information about setting up the product for the first time.
3.1.1 Lifting and carrying
► WARNING! The R&S AREG800A can be heavy, e.g., if fully equipped. Use a lifting
equipment, see also "Lifting and carrying the product" on page 11.
Use the carrying handles at the side for lifting and carrying the R&S AREG800A.
The handles at the front are only for pushing and pulling the instrument when
mounting in a rack, see
Chapter 3.1.4.2, "Mounting the R&S AREG800A in a rack" ,
on page 19.
3.1.2 Unpacking and checking
1. Unpack the R&S AREG800A carefully.
2. Retain the original packing material. Use it to protect the control elements and con-
nectors when transporting or shipping the R&S AREG800A later.
See also Chapter 13, "Transporting" , on page 375.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact Rohde & Schwarz.
3.1.3 Choosing the operating site
Specific operating conditions ensure proper operation and avoid damage to the prod-
uct and connected devices. For information on environmental conditions such as ambi-
ent temperature and humidity, see the data sheet.
See also "Choosing the operating site" on page 12.
Electromagnetic compatibility classes
The electromagnetic compatibility (EMC) class indicates where you can operate the
product. The EMC class of the product is given in the data sheet under "General data".
●
Class B equipment is suitable for use in:
– Residential environments
Preparing for use