R&S AREG800A, Руководство пользователя, Страница: 61 / 411

Configuring radar objects
R&S
®
AREG800A
61 User Manual 1179.3615.02 ─ 01
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:PROGress
on page 320
[:SOURce<hw>]:AREGenerator:SCENario:STATus
on page 321
Select File
Provides access to the standard "File Select" function of the instrument. The provided
navigation possibilities in the dialog are self-explanatory.
See also Chapter 8, "File and data management" , on page 118. The dialog allows you
to select user-defined and recent files. Table 5-1 provides an overview.
Table 5-1: Supported scenario file types
File extension Remark
*.osi Encrypted
*.sm Encrypted
*.tcs Encrypted
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:FILE
on page 319
[:SOURce<hw>]:AREGenerator:SCENario:FILE:CATalog
on page 319
Start [hh:mm:ss.fff]
Sets the start position in the loaded file.
Data which chronologically precedes the start position is not replayed by the player.
The entered time stamp must chronologically always precede the entry under
Stop .
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:POSition:STARt
on page 320
Position [hh:mm:ss.fff]
Displays the current play position in the file.
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:POSition:ACTual
on page 319
Stop [hh:mm:ss.fff]
Sets the end position in the file.
Data which chronologically follows the end position is not replayed by the player. When
the player reaches the "Stop" position, it returns to the "Start" position ("Replay Mode >
Loop"). The entered time stamp must chronologically always follow the entry under
Play .
Remote command:
[:SOURce<hw>]:AREGenerator:SCENario:POSition:STOP
on page 320
Replay Mode
Defines, if the files are played once or continuously.
Replayed are files within the defined start position and stop position. See "Start
[hh:mm:ss.fff]" on page 61 and "Stop [hh:mm:ss.fff]" on page 61.
"Single" Files are played once within the defined positions in the file.
Scenario settings