14. NEVER CARRY FASTENERS OR OTHER
HARD OBJECTS IN THE SAME POCKET OR
CONTAINER WITH FUEL CELL.
The Fuel Cell
could be punctured, causing serious injury .
15. NEVER ALLOW ANYONE TO USE THE
GYPFAST TOOL UNLESS THEY READ AND
UNDERSTAND THE TOOL MANUAL AND ALL
SAFETY INSTRUCTIONS.
It is the tool owner’s
responsibility to make sure that all GypFast tool
users read and fully understand all tool operation,
safety and maintenance instructions .
16. FUEL CELL STORAGE.
Fuel Cells contain flammable
gases which are under pressure
and must be stored in an area
where they will not be exposed
to an open flame, sparks, or
temperatures above 120°
Fahrenheit (49° Centigrade) . Exposure to temperatures
above 120°F (49°C) may cause the Fuel Cells to
leak or burst, releasing the flammable gases and
creating a risk of fire or explosion .
17. FUEL CELL DISPOSAL.
Never attempt to
puncture, crush, burn or refill a Fuel Cell . Always
dispose of empty cells with trash that will not be
burned . Also, never place the Fuel Cell with other
materials for reclamation or recycling .
18. TOOL STORAGE.
At the end of every workday,
remove the Battery and store it in the carrying
case . Recharge the Battery only if required as
indicated by a red charge light in the handle .
19. KEEP THE TOOL CLEAN.
At the end of each
work day, take a minute to wipe the GypFast tool
with a clean rag . A dirty tool is more likely to jam
or malfunction .
20. NEVER PLACE YOUR
HAND OR FINGERS OVER
THE NOSE OF THE TOOL.
The fastener or piston can
seriously injure your hand
in the event of an accidental
discharge .
SAFETY INSTRUCTIONS
6
SAFETY INSTRUCTIONS
