Ramset warrants that new GypFast systems
power fastening tools, parts and accessories
will be free from defects in material and
workmanship for the period shown below.
TWO-YEAR/50,000 SHOT WARRANTY
A two-year/50,000 shot warranty, which ever
comes first, will apply to all parts, except those
listed below as normal wearing parts, or parts
which are specifically covered by an extended
warranty.
SIX-MONTH/10,000 SHOT WARRANTY
A six-month/10,000 shot warranty applies to the
following parts, which are considered normal
wearing parts:
• Bumper
• Piston Assembly
• O-Rings
• Piston Rings
The warranty period is based off of tool build
date, determined from the tool serial number.
Ramset may extend the warranty time frame
from the date of purchase with a qualifying
document proving date of purchase.
WARRANTY STATEMENT
Ramset’s sole liability hereunder will be to
replace any part or accessory which proves
to be defective within the specific time period.
Any replacement part or accessory provided
in accordance with this warranty will carry
a warranty for the balance of the period of
warranty applicable to the part it replaces.
This warranty does not apply to part replace-
ment required due to normal wear.
This warranty is void as to any tool which has
been subjected to misuse, abuse, accidental
or intentional damage, use with fasteners,
fuel, battery, or battery chargers not meeting
Ramset specification, size, or quality, improperly
maintained, repaired with other than genuine
GypFast replacement parts, damaged in transit
or handling, or which, in Ramset’s opinion, has
been altered or repaired in a way that affects or
detracts from the performance of the tool.
Ramset MAKES NO WARRANTY, EXPRESSED
OR IMPLIED, RELATING TO MERCHANTABILITY,
FITNESS, OR OTHERWISE, EXCEPT AS STATED
ABOVE and the liability AS STATED ABOVE
AND AS ASSUMED ABOVE is in lieu of all other
warranties arising out of, or in connection with,
the use and performance of the tool, except to
the extent otherwise provided by applicable law.
Ramset SHALL IN NO EVENT BE LIABLE FOR
ANY DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES, INCLUDING, BUT NOT LIMITED TO
DAMAGES WHICH MAY ARISE FROM LOSS
OF ANTICIPATED PROFITS OR PRODUCTION,
SPOILAGE OF MATERIALS, INCREASED COST
OF OPERATION OR OTHERWISE.
Ramset reserves the right to change
specifications, equipment, or designs at
any time without notice and without
incurring obligation.
WARRANTY
WARRANTY
17
RAMSET GAS TOOL SYSTEMS WARRANTY AND LIMITATIONS
