DESCRIPTION
The GypFast tool is a self-contained, fully portable
tool that uses liquid hydrocarbon fuel to power a
unique linear drive internal combustion motor .
In order for you to fully understand the information
contained in this manual, you need a basic under-
standing of the tool . As you can see in the illustration
below, the GypFast tool is made up of three
assemblies: the Handle, the Motor, and the
Magazine .
As you examine the GypFast tool, become familiar
with the three major assemblies and the various
components located in each of them .
The Handle Assembly contains the Fuel Cell, the
Battery Voltage Indicator Light, Battery and the
Trigger .
The Motor Assembly contains the Cover and Filter,
the Motor Housing, the Nose, and the Safety Yoke .
The Magazine Assembly contains the Magazine,
Magazine Dow and Hinge Pin .
SPECIFICATIONS
Dimension:
Height 16 inches
Length 13 inches
Weight:
7 .9 pounds
Cycle Rate:
Intermittent Operation 2 to 3 pins per
second . Continuous Operation 1000 pins per hour
NOTE:
Exceeding these rates could cause the tool
to overheat, resulting in loss of performance or
damage to tool components .
By using the GypFast tool at its recommended
operation rate you will be able to drive several
thousand fasteners in a typical workday .
Maximum Fastener Length:
2-1/2 inch x 0 .140 dia . shank
Magazine Capacity:
150 count coil .
Battery:
6 volts D .C .—Provides enough energy to
drive approximately 3000 fasteners on one charge .
Fuel Cell:
Liquid hydrocarbon—Provides enough
fuel to drive up to 1000 fasteners .
AN OVERVIEW OF THE GYPFAST TOOL
3
AN OVERVIEW OF THE GYPFAST TOOL
