MAINTENANCE
14
MAINTENANCE
END-OF-WORKDAY ROUTINE
At the end of each workday, conduct an end-of-
workday routine . These simple steps are based on
maintaining the safety and operational efficiency of
the GypFast tool .
Before you leave the worksite:
1 . Remove the Battery and store in the tool case .
Always use the GypFast tool case for transporting
and storing the tool .
2 . Dispose of all empty Fuel Cells . Remember
to dispose of these cells where they will not
be found by children, crushed, punctured, or
burned .
3 . Place the Battery in its Charger only if it needs
charging as indicated by the red charge light in
the handle .
4 . Wipe your GypFast tool with a clean, soft cloth .
5 . Check Adjustable Nosepiece Element to ensure
it is operating freely .
These simple steps will not only ensure that your
GypFast tool is ready to go to work the next day,
but will also ensure that you get the maximum
efficiency from your tool .
GYPFAST CORDLESS COIL TOOL
ACCESSORIES
A variety of accessories are available for the
GypFast tool:
•
Battery
• Clear Safety Glasses
• GypFast tool Battery Charger
• Magnetic Nosepieces for Lath Discs
• Lath Disc (1” and 1-1/4”)
Contact your ITW Ramset Distributor Sales
Representative for additional information .
