306
IN CASE OF EMERGENCY
4. Pull the desired bulb straight from the
socket.
CHMSL Bulb And Socket
Outside Bulbs: Cargo Lamps
Inside Bulb: Center High-Mounted Stop
Lamp
5. Reverse the procedure for installation of
bulbs and housing.
Cab Top Clearance Lamps — If Equipped
1. Remove the two screws from the top of the lamp.
Removing Rear Screw From Clearance Lamp
2. Rotate the bulb socket ¼ turn and pull it
from the lamp assembly.
Removing Bulb Socket From Clearance Lamp
3. Pull the bulb straight from it's socket and
replace.
Removing The Bulb From The Bulb Socket
CAUTION!
Do not contaminate the bulb glass by
touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened bulb
life will result.
19_DJD2_OM_EN_USC_t.book Page 306