GETTING TO KNOW YOUR VEHICLE
43
If the mirror is manually folded after electrically
cycled, a potential extra button push is required
to get the mirrors back to the home position. If
the mirror does not electrically fold, check for
ice or dirt build up at the pivot area which can
cause excessive drag.
Power Folding Mirror Switch
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors
if the following occurs:
The mirrors are accidentally blocked while
folding.
The mirrors are accidentally manually
folded/unfolded.
The mirrors come out of the unfolded position.
The mirrors shake and vibrate at normal
driving speeds.
To Reset The Power Folding Mirrors:
1. Using the power folding mirror switch,
move the mirror to its normal driving
(home) position.
2. Using the power folding mirror switch, move
the mirror to the full retract position (this
may require multiple button pushes). This
resets them to their normal position.
NOTE:
The power fold mirrors are designed to operate
while the vehicle is stationary or traveling at
moderate speeds. If you attempt to power fold
the mirrors at high speeds they may not fully
open or close. You should slow down to a
moderate speed and complete the operation.
When pushing the power fold button 10 or
more times in one minute the system shuts
down for one minute to protect the motors
from over heating.
Outside Mirrors Folding Feature
All outside mirrors are designed to be able to be
manually folded both forward and rearward to
prevent damage.
Folding Mirror
CAUTION!
It is recommended to fold the mirrors into the
full rearward position to resist damage when
entering a car wash or a narrow location.
2
19_DJD2_OM_EN_USC_t.book Page 43
