IN CASE OF EMERGENCY
305
3. Disconnect the wiring harness connectors
from the bulb socket.
4. Rotate the bulb socket counterclockwise
1/4 turn to unlock it from the housing.
5. Pull the bulb straight out of the socket.
6. Reverse the procedure to install the bulb
and housing.
Center High-Mounted Stoplamp (CHMSL)
With Cargo Lamp
1. Remove the two screws holding the
housing/lens to the body as shown.
CHMSL Mounting Screw Locations
2. Separate the connector holding the housing
and wiring harness to the body.
CHMSL Connector Location
3. Turn the desired bulb socket ¼ turn and
remove the socket and bulb from housing.
CAUTION!
Do not contaminate the bulb glass by
touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened bulb
life will result.
6
19_DJD2_OM_EN_USC_t.book Page 305