GETTING TO KNOW YOUR VEHICLE
101
3. Push clamp wires up and under the flange
of the box (or flange of the Ram Box rail, if
equipped) to the semi clamped position.
Semi Clamped Position
4. Push clamp handles upward to the clamped
position to properly engage the clamps.
Clamped Position
NOTE:
Once clamped, be sure the clamps are not
improperly attached to the truck bed flange.
Improper Clamp Position
5. Disengage the stowage straps.
6. Unfold the center and rear panels to the
intermediate position.
NOTE:
The vehicle cannot be driven when the Tonneau
Cover is in this position.
Intermediate Position (Vehicle Cannot Be Driven)
2
19_DJD2_OM_EN_USC_t.book Page 101