RAM 3500 2019, Руководство пользователя

Страница: 243 / 484

STARTING AND OPERATING 241
Adaptive Cruise Control (ACC) Operation
The speed control buttons (located on the right side
of the steering wheel) operate the ACC system.
Adaptive Cruise Control Buttons
NOTE:
Any chassis/suspension or tire size modifica -
tions to the vehicle will effect the performance
of the Adaptive Cruise Control and Forward
Collision Warning System.
Activating Adaptive Cruise Control (ACC)
You can only engage ACC if the vehicle speed is
above 0 mph (0 km/h).
The minimum set speed for the ACC system is
20 mph (32 km/h).
When the system is turned on and in the ready
state, the instrument cluster display will read
“ACC Ready.”
When the system is off, the instrument cluster
display will read “Adaptive Cruise Control (ACC)
Off.”
NOTE:
You cannot engage ACC under the following
conditions:

When in Four-Wheel Drive Low.

When you apply the brakes.

When the parking brake is applied.

When the automatic transmission is in PARK,
REVERSE or NEUTRAL.

When the vehicle speed is outside of the
speed range.

When the brakes are overheated.

When the driver door is open at low speed.

When the driver seat belt is unbuckled at low
speed.

ESC Full-Off Mode is active.
To Activate/Deactivate
Push and release the Adaptive Cruise Control
(ACC) on/off button. The ACC menu in the
instrument cluster displays “ACC Ready.”
Adaptive Cruise Control Ready

When entering a turn lane or highway off
ramp; when driving on roads that are
winding, icy, snow-covered, slippery, or
have steep uphill or downhill slopes.

When towing a trailer up or down steep
slopes.

When circumstances do not allow safe
driving at a constant speed.
1 — Adaptive Cruise Control On/Off Button
2 — Distance Button
WARNING! (Continued)
5
19_DJD2_OM_EN_USC_t.book Page 241