RAM 1500 2017, Руководство пользователя

Страница: 87 / 372

To Turn Off The Engine Using ENGINE START/STOP Button
1. Place the gear selector in PARK, then push and release the ENGINE START/STOP
button.
2. The ignition will return to the OFF mode.
3. If the gear selector is not in PARK, the ENGINE START/STOP button must be held
for two seconds or three short pushes in a row with the vehicle speed above 5 MPH
(8 km/h) before the engine will shut off. The ignition will remain in the ACC mode
until the gear selector is in PARK and the button is pushed twice to the OFF mode.
4. If the gear selector is not in PARK and the ENGINE START/STOP button is pushed
once with the vehicle speed above 5 MPH (8 km/h), the instrument cluster will
display a “
Vehicle Not In Park ” message and the engine will remain running. Never
leave a vehicle out of the PARK position, or it could roll.
NOTE:
If the gear selector is not in PARK, and the ENGINE START/STOP button is pushed
once with the vehicle speed below 5 MPH (8 km/h), the engine will shut off and the
ignition will remain in the ACC position. If vehicle speed drops below 1.2 MPH
(1.9 km/h), the vehicle may AutoPark. See AutoPark section for further details.
ENGINE START/STOP Button Functions — With Driver’s Foot OFF The Brake Pedal
(In PARK Or NEUTRAL Position)
The ENGINE START/STOP button operates similar to an ignition switch. It has three
modes: OFF, ACC, and RUN. To change the ignition modes without starting the
vehicle and use the accessories, follow these directions:
1. Start with the ignition in the OFF mode.
2. Push the ENGINE START/STOP button once to place the ignition to the ACC
mode.
3. Push the ENGINE START/STOP button a second time to place the ignition to the
RUN mode.
4. Push the ENGINE START/STOP button a third time to return the ignition to the
OFF mode.
O P E R A T I N G Y O U R V E H I C L E
85