RAM 1500 2017, Руководство пользователя

Страница: 69 / 372

Driver Memory Seat — If Equipped
This feature allows the driver to store up to two different memory profiles for easy
recall through a memory switch. Each memory profile contains desired position
settings for the driver’s seat, side mirrors, adjustable pedals (if equipped) and a set
of desired radio station presets. Your remote keyless entry key fob can also be
programmed to recall the same positions when the unlock button is pushed.
NOTE:
Your vehicle is equipped with two key fobs, one key fob can be linked to memory
position 1 and the other key fob can be linked to memory position 2.
The memory seat buttons are located on the outboard side of the driver’s seat
cushion.
Programming The Memory Feature
To create a new memory profile, perform
the following:
1. Cycle the vehicle’s ignition to the ON/
RUN position (do not start the en-
gine).
2. Adjust all memory profile settings to
desired preferences (seat, side mir-
rors, adjustable pedals and radio sta-
tion presets).
3. Push and release the S (set) button on
the memory switch.
4. Within five seconds, push and release
either of the memory buttons (1) or
(2). The instrument cluster display will show which memory position has been set.
NOTE:
• Memory profiles can be set without the vehicle in PARK, but the vehicle must be
in PARK to recall a memory profile.
• To set a memory profile to your key fob, refer to “Linking And Unlinking The
Remote Keyless Entry Key Fob To Memory” in this section.
Memory Seat Button Location
G E T T I N G S T A R T E D
67