TONNEAU COVER
The Tonneau Cover can be removed and reinstalled by using the locking clamps
located underneath the Tonneau Cover.
NOTE:
Be sure that the Tonneau Cover is secured before driving.
EASY-OFF TAILGATE
To simplify mounting of a camper unit with an overhang, the tailgate can be removed.
NOTE:
If your vehicle is equipped with a rear camera or Remote Keyless Entry, the electrical
connector must be disconnected prior to removing the tailgate.
Removing The Tailgate
1. Disconnect the wiring harness for the rear camera or Remote Keyless Entry (if
equipped).
2. Unlatch the tailgate and remove the support cables by releasing the lock tang
from the pivot.
3. Raise the right side of the tailgate until the right side pivot clears the hanger
bracket.
4. Slide the entire tailgate to the right to free the left side pivot.
5. Remove the tailgate from the vehicle.
NOTE:
Do not carry the tailgate loose in the truck pickup box.
Locking Tailgate
The lock is located next to the tailgate handle. The tailgate can be locked using the
vehicle key.
WARNING!
To avoid inhaling carbon monoxide, which is deadly, the exhaust system on
vehicles equipped with “Cap or Slide-In Campers” should extend beyond the
overhanging camper compartment and be free of leaks.
U T I L I T Y
212
Содержание 1500 2017
Страница 7: ...INTRODUCTION WELCOME 5 ...
Страница 369: ...NOTES 367 ...
Страница 370: ...NOTES 368 ...