ENGINE START/STOP Button Functions — With Driver’s Foot OFF The Brake Pedal
(In PARK Or NEUTRAL Position)
The ENGINE START/STOP button operates similar to an ignition switch. It has three
modes: OFF, ACC, and RUN. To change the ignition modes without starting the
vehicle and use the accessories, follow these directions:
1. Start with the ignition in the OFF mode.
2. Push the ENGINE START/STOP button once to place the ignition to the ACC mode.
3. Push the ENGINE START/STOP button a second time to place the ignition to the
RUN mode.
4. Push the ENGINE START/STOP button a third time to return the ignition to the
OFF mode.
AutoPark — Rotary Shifter and 8-Speed Trans Only (If Equipped)
AutoPark is a supplemental feature to assist in placing the vehicle in PARK should
the situations on the following pages occur. It is a back up system and should not be
relied upon as the primary method by which the driver shifts the vehicle into PARK.
The conditions under which AutoPark will engage are outlined on the following pages.
WARNING!
• Driver inattention could lead to failure to place the vehicle in PARK. ALWAYS DO
A VISUAL CHECK that your vehicle is in PARK by verifying that a solid (not
blinking) “P” is indicated in the Instrument Cluster Display and near the gear
selector. If the "P" indicator is blinking, your vehicle is not in PARK. As an added
precaution, always apply the parking brake when exiting the vehicle.
• AutoPark is a supplemental feature. It is not designed to replace the need to
shift your vehicle into PARK. It is a back up system and should not be relied
upon as the primary method by which the driver shifts the vehicle into PARK.
If the vehicle is not in PARK and the driver turns off the engine, the vehicle may AutoPark.
AutoPark will engage when all of these conditions are met:
• Vehicle is equipped with a rotary shifter and an 8-speed transmission
• Vehicle is not in PARK
• Vehicle Speed is 1.2 MPH (1.9 km/h) or less
• Ignition switched from RUN to ACC
NOTE:
For Keyless Go equipped vehicles, The engine will turn off and the ignition switch will
change to ACC mode. After 30 minutes the ignition switches to OFF automatically,
unless the driver turns the ignition switch OFF.
If the vehicle is not in PARK and the driver exits the vehicle with the engine running, the
vehicle may AutoPark.
1 5 0 0 3 . 0 L D I E S E L
229
Содержание 1500 2017
Страница 7: ...INTRODUCTION WELCOME 5 ...
Страница 369: ...NOTES 367 ...
Страница 370: ...NOTES 368 ...