Ralco MTR 221/A, Инструкция по эксплуатации

Страница: 62 / 66

MTR221/A - MTR221/A DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
Modello/Model R221/A - R221/A DHHS
G
ENERAL
56
R22
1/A
- R221
/A DHHS -
Gen
eral
Ralco
srl
GENERAL
R
EPAIRS
In the event the customer finds any noncompliance or malfunctions of the collimator, contact
Ralco via e-mail at the address: p.vescera@ralco.it (Ralco Assistance).
The information must include:
• The model and serial number of the collimator found on the label.
• A detailed description of the problem (in Italian or English).
• It is important to specify if you want a repair or a total refurbishment of the product.
Ralco will resolve the problem by either providing directions, and/or field service or by sending
replacement parts.
In the event the collimator needs to be repaired at Ralco, customer service will immediately
provide the customer with a RMA (Return Merchandise Authorization) number as your consent
to the return and provide all necessary additional information.
The shipping of the unit is at the customer’s expense if the unit is out of warranty, see
paragraph
W
ARRANTY
in this chapter.
Ralco reserves the right to decide if the collimator is to be repaired or substituted.
Defective material is to be sent to:
RALCO SRL
VIA DEI TIGLI 13/G
20853 BIASSONO (MB) - ITALIA
FAX: ++39-039-2497.799
EMAIL: RALCO@RALCO.IT
E
ND OF
L
IFE
D
ISPOSAL
Your collimator contains materials which can be recycled and reused. Specialised companies
can recycle your product to increase the amount of reusable materials and to minimize the
amount of materials to be disposed of.
The product contains lead which can be highly contaminating if dispersed
incorrectly. The following symbol signifies that the product conforms to the
environmental requirements of directives 202/95/EC, 2002/96/EC, 2003/108/EC;
it must be disposed of correctly at the end of its life-cycle.
The collimator does not contain polluting materials or products with the exception
of the lead that composes the shutters - avoid direct contact with lead especially for prolonged
periods.
It is required that you observe Local Laws regulating the disposal of the collimator using
certified environmental management entities. Should this prove impossible, return the
collimator to Ralco at the purchaser's expense and Ralco will undertake its correct disposal.
If you are replacing the unit with new equipment, you may return the old collimator to Ralco.
Please contact us if you require further information.
W
ARRANTY
Ralco undertakes to replace and repair any collimator part during a period of 24 months from
the date of invoice and cover the labour costs involved, not including the exemptions below.