MTR221/A - MTR221/A DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
Modello/Model R221/A - R221/A DHHS
O
PTIONAL
I
TEMS
49
R22
1/A
- R221
/A DHHS -
Option
al Ite
m
s
Ralco
srl
J3 - P
ROGRAMMING
C
ONNECTORS
1. Vpp
2. +5 V
3. GND
4. PGD
5. PGC
6. NC
J4 - H
OME
S
ENSOR
I
NPUT
+ E
XTER
-
NAL
LED
1. + External LED
2. - External LED
3. - Photosensor LED Cathode
4. + Photosensor LED Anode
5. Input signal (Photosensor output collector)
6. GND (Photosensor output emitter)
Jumpers
OFF: without jumper
ON: with jumper
JP1, JP2 - A
LTERNATE
/D
IRECT
P
OWER
S
UPPLY
OFF: alternate power supply
ON: direct power supply (pay attention to polarity)
JP3 - F
AN
P
OWER
S
UPPLY
OFF: fan is operated by micro controller according to
settings made with LED
ON: fan is always supplied
JP4 - L
ASER
P
OWER
S
UPPLY
OFF: Laser is micro controller operated
ON: Laser is always supplied
JP5 - C
ONFIGURATION
OF
P
USH
-
BUT
-
TON
NUMBER
OUTPUT
OFF: LED and laser are controlled by only push button (on
J2)
ON: LED is controlled by standard push button (on J2),
laser is controlled independently by push button on JP6.
JP6 - B
UTTON
I
NPUT
FOR
L
ASER
O
N
TIME
.
1. Laser ON button pin 1
2. Laser OFF button pin 2
JP8 - C
ONFIGURATION
OF
LED ON
TIME
Laser is controlled independently by the timer, this
configuration is applicable in the same manner for both
push buttons.
OFF
: output status is changed by pressing button (if the
light is OFF will be ON and vice versa).
ON
: the timer operates in the time renew mode. When the
button is pressed the time is renewed without the LED OFF
(if the LED is ON it will stay ON but with the time reset). The
same is applicable for the laser if is independent.
FAN
The fan switches ON together with the LED, and operates
15 seconds longer after the LED OFF.
I
MPORTANT
JP7 - P
ROGRAMMING
OF
M
ICROCONTROLLER
P
IC
16F52
OFF - Pic16F526 may be programmed by removing JP8
(thermistor input) from Pic
ON - JP8 connected to Pic prevents reprogramming
Содержание MTR 221/A
Страница 66: ...info_cl fm...
