Raidon GR2880-8S-U5 Скачать руководство пользователя страница 7

Страница: 7 / 41

Chapter 2 Installation

2.1 Pre-cautions

2.1.1 Features of the RAIDON SAS series products

Features of the RAIDON SAS series products:

•

Employs 2.5” SATA HDD

•

Dual SAS tunnel

•

Support RAID 6

•

Support hot swap

•

N-way mirroring

•

Snapshot function

•

GUI

•

Volume based share/exclusive cache configuration

•

Support S.M.A.R.T

•

Support SAF-TE

•

Disk roaming

The RAIDON SAS series products may provide non-stop services with high fault tolerance when

installed properly.

The RAIDON SAS series products connect to related system via the SAS interface and can be

configured at any RAID level for reliable data protection. At RAID 6 level there can be 2 failed disks

without damaging existing data. Data stored in the damaged hard disk(s) can be recovered from that

kept in the normal running hard disks.

The RAIDON SAS series products are the best and most economical data storage backup solution for

small and medium enterprise users.

2.1.2 Confirmation of related items

Before installing your product please ensure the following items:

•

When removing objects out of the shipping carton please ensure that all the items are in there and

not damaged

•

Please read the latest release before updating your firmware

•

Ensure your server is equipped with a SAS HBA card

•

A piece of CAT 5e or CAT 6 network cable for the GUI administration port

•

Ready your storage system configuration plan

•

Network data of the GUI administration port. For fixed IP please make the data of your IP address,

sub-network mask and default gateway available in advance. (Contact your MIS personnel for above

data.)

•

Make all the hardware, power and wires for COM port and Administration port (LAN or RS232), ready

before powering on your system.

Installation

Содержание GR2880-8S-U5










































Результаты поиска

Содержание GR2880-8S-U5

Отзывы:

Похожие инструкции для GR2880-8S-U5

Бренды по названию

Популярные бренды

Raidon GR2880-8S-U5, Руководство пользователя

Результаты поиска

Содержание GR2880-8S-U5

Отзывы:

Похожие инструкции для GR2880-8S-U5

Бренды по названию

Популярные бренды