3.6.2 Hardware monitor
Select the Hardware monitor function to view current voltage and temperature.
Figure 3.6.2.1
Please check the Auto shutdown option to shut down your system when the voltage and temperature
are over the normal operational range for better data protection.
3.6.3 S.M.A.R.T.
The Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.) is a hard disk diagnostic tool that
alerts you of disk failure in advance. This gives you an opportunity to take preventative actions before
the disk is failed.
The S.M.A.R.T. function keeps on monitoring various properties of your hard disk and alerts you when
specific disk is reaching its capacity. The pre-set disk failure notice helps you replace or backup it in
advance. This is better than left with a failed disk or having to rebuild a new one.
Select the S.M.A.R.T. option to display the S.M.A.R.T. data of your hard disk. Number in front of the
parenthesis represents current value while within it for default value. Default values differ among
brands of disks. Please refer to the user manual for detailed specification of your disks.
Figure 3.6.3.1
3.6.4 UPS
Select the UPS option to set up your Uninterruptible Power Supply (UPS).
Figure 3.6.4.1
38
Introduction to the GUI
