Figure 3.5.3.6
The Set disk property function can be used to change settings of given RAID group including: Write
cache, Standby, Readahead and Command queuing.
Figure 3.5.3.7
The More information option displays detailed information of given RAID group.
Figure 3.5.3.8
3.5.4 Virtual disk
You may view status of each virtual disk with the Virtual disk function. At the host system end what the
device administrator can see are virtual disks set up previously. If no virtual disk has been set up then
there will be no available you can find at the host end.
Click Create to set up a new RAID group then click Select PD to select hard disk for it.
Figure 3.5.4.1
Field description:
No.
Virtual disk ID. Click the button below individual ID for detailed setups.
Name
Name of current disk drive.
Size
Capacity of the virtual disk. Can be expressed in unit of GB or MB.
Introduction to the GUI
31
