Figure 3.5.1.1
Step 2: Select to accept one of the pre-defined disk drive combinations or to configure a new one by
yourself.
Figure 3.5.1.2
Step 3: Setup capacity of disk volume. (The default size is the whole available space.)
Figure 3.5.1.3
Step 4: Confirm settings given by you.
Figure 3.5.1.4
Select Confirm and the Virtual disk menu appear with the newly set up disk drive.
Figure 3.5.1.5
3.5.2 Physical disk
The Physical disk function helps you to view status of hard disks now installed in your system.
Figure 3.5.2.1
Introduction to the GUI
27
