Raider 40, Инструкция по сборке

Страница: 76 / 80

Raider 40 Manual Military version
56
Section 4. ENGINE DETAILS
SYNCHRONIZATION AND LINKAGE ADJUSTMENTS
To ensure consistent engine idling and smooth operation throughout the full RPM range, it is
important that each procedure be performed exactly as written and in the following sequence:
1. ignition Timing Adjustment
2. Multi-fuel (Throttle Body) Atomizer Synchronization
WARNING
Before beginning procedures, disable the ignition system to prevent accidental engine
startup.
NOTE.
The seam at the mating surfaces of the crankcase halves is the alignment point for
ail ignition timing degree measurements.
TROUBLESHOOTING
The troubleshooting chart lists common engine symptoms related to problems with the fuel
system. lt also indicates specific malfunctions in the fuel system which may be causing the
problem so it can be isolated more effectively. Before beginning major troubleshooting
operations on the fuel system, perform the following operations:
• Disconnect fuel tank hose from the engine. Connect a known good tank and hose and
determine if the problem persists.
• Remove and clean the engine fuel filter assembly and replace the filter element.
• Replace filter element in the fuel tank pickup tube.
-67-