Raider 40, Инструкция по сборке

Страница: 40 / 80

-29 -
Raider 40 Manual Military version
10-1
10-3 10-4
10-5
10-6
10-1
10-7
10-6
Dewater and Start Procedure: (Pull Start)
1. Connect fuel line.
2. Tilt engine into boat
3. Push dewatering valve toward rear of engine – hold
back 10-7
4. Pump primer bulb clearing old fuel
5. Release dewatering against fuel valve
6. Pull slowly 8 times on rope. Even strokes.
7. Tilt engine back to standard position
8. Pump primer two times
9. Pump primer bulb until tight
10. Slide dewatering valve to front of engine (close) 10-1
11. Pull rope until engine starts
Dewater and Start Procedure: (Electric Start)
Perform 1 – thru – 10
Press start button
Caution : Do not hit start button until water is cleared
between pistons and head. If this is done internal damage
to the engine can occur.
10-6
10-5