Raider 40, Инструкция по сборке

Страница: 71 / 80

-62-
Raider 40 Manual Military version
4.2.1 General Equipment Required
Water Pressure Gauge - 0 - 15 psi [0 - 103 kPa / 0 - 1 kg / cm2]
Fuel Pressure Gauge - 0 - 15 psi [0 - 103 kPa / 0 - 1 kg / cm2]
Torque Wrench - 0 - 150 in-lb [0 - 17 N·m / 0- 1.7kg-m]
Torque Wrench - 0 - 750 ft-lb [0 - 1000 N·m / 0 - 100 kg-m]
Dial Gauge - minimum scale 0.0001 in [0.01 mm]
Micrometer Set or Dial Caliper - minimum scale 0.0001 in [0.01 mm]
Telescoping Gauge, Inside Micrometer Set, or Dial Caliper, minimum scale 0.0001 in [0.01 mm]
Variable Load High Rate Discharge Tester,
Electronic Specialties ® Model 700 or equivalent
Analog Multimeter, Electronic Specialties ® Model M-530 or equivalent
Digital Multimeter, Electronic Specialties ® Model KD 3200 or equivalent
Digital Pulse Tachometer, 10 - 6000 RPM, Electronic Specialties ® Model 321 or equivalent
Ammeter, 0 - 100 A
Gearcase Pressure Tester, Stevens ® S-34 or equivalent
Gearcase Vacuum Tester, Stevens ® V-34 or equivalent
Engine Compression Gauge, 0 - 300 psi [0 - 2000 kPa / 0 - 20 kg/cm2]
Spark Gap Tester,
Stevens ® S-13C, S-48, or equivalent
Flexible Fuel Tubing, 1/4 in I.D. x 5 in [6 mm I.D. x 127 mm]
Flexible Fuel Tubing, 3/8 in I.D. x 5 in [9.5 mm I.D. x 127 mm]
Industrial Thermometer, minimum 300°F [150°C]
Heat-Resistant Container,
Pyrex ®
Bearing Puller
Seal Pullers
Seal Installers
Heat Gun
Hydrometer