EchoView
User’s Guide
39
9.2
Using The “Panic” Function
The “Panic” function is designed so that it is very difficult to invoke by
accident.
Start at the normal operating mode screen:
1.
From the normal operating mode screen, press and hold all
three buttons until you see this screen:
2.
Now press “Trigger Relays.” This screen is now shown:
9.2.1
Trigger All Relays
With “All Relays” highlighted, press [MODE] to trigger all relays
simultaneously.
9.2.2
Trigger A Selected Relay
Scroll down the list of relays (1 through 5) by pressing [N/-]. Once
you have highlighted the individual relay you want to trigger, press
[MODE]. This triggers only that one selected relay.