EchoView
User’s Guide
25
While the EchoView is being reset to its original factory settings, the
screen shows that the activity is taking place:
When the reset is complete, this screen appears:
Then the unit returns to the Settings menu.
Note:
If you perform a factory reset, all of your settings are removed and
cannot be retrieved.
7.1.6
Edit Password
You can change the password by selecting “Edit Password.”
At this screen, input your new password over the old one (or the default):
Increase the number from 0 through 9 by pressing [Y/+].
Decrease the number from 9 through 0 by pressing [N/-].
Step from digit to digit using [MODE].
Note:
If you make a mistake, you can cycle through the digits by
pressing [MODE] and then using [Y/+] and [N/-] to change the number
in each position.