EchoView
User’s Guide
33
7.3
Viewing Monitors’ Data (Anytime)
You can view the data from each monitor on the network, even if
the monitor is not in alarm.
To view the selected monitor’s data, select the monitor you want to
view. Scroll up or down the list by using the [Y/+] and [N/-] keys.
To make your selection, press [MODE]. The screen changes to
show the data. For example:
This provides you with an overview, including
The monitor’s location (if it has been programmed into the
FMC2000 controller)
The type of monitor
The type of sensor
The alarm state (NONE is shown when a monitor is not in
alarm)
The level or concentration of the substance being
monitored (the unit depends on the type of sensor)
To exit from this screen back to the main reading screen, press
[MODE].
7.4
Backlight
Whenever you press the [Y/+] or [N/-] key while viewing the data,
the backlight turns on for two seconds and then shuts off.
Monitor
Identifier
Sensor
Location
Alarm type
Sensor reading