EchoView
User’s Guide
34
8
Viewing Alarm Data
Whenever the FMC2000 controller in a network receives alarm
data from a monitor on the network, the EchoView also receives it.
When monitoring the network and when no alarms are present, the
EchoView’s display looks like this:
All monitors are represented with a unique identifier and a circle.
(A filled—dark—circle indicates the selected monitor for viewing,
whereas an unfilled circle indicates the monitor’s presence on the
network and no alarm.)
To select a monitor:
Press [Y/+] to scroll up or [N/-] to scroll down.
Note:
The scrolling “wraps,” so once you reach the top or bottom item, it
starts scrolling through the items again. If there are more monitors than
the display can show on one screen, it advances to the next screen. When
the last monitor on that screen is reached, it “wraps” back to the first
item on the initial screen.
To make a selection:
Scroll until the circle to the left of your choice is
black, and then press [MODE].
Note:
If you do not make a selection in 60 seconds, it automatically exits
to the main reading screen.