Selecting Channels
WinLink User and Installation Guide
Version 1.750
3-49
3.
Click at least two check boxes in the Available Channels List of all
the allowable channels that can be automatically selected.
7.
Note:
Installation will not continue until at least two channels are defined.
Selecting a new channel causes the system quality to change. The
quality bar shows the adjustment until the system finds the best
quality link.
Any channel selected is evaluated for 60 seconds; therefore this
selection process may take a few minutes.
4.
If you are not satisfied with the channel that is selected
automatically, click Reselect Channel.
A new channel will be selected from one of the Available Channels
that has been defined.
5.
Click Next.
The Evaluating Rate box appears. The optimum rate for the link is
selected.
The Service Parameters dialog box opens. Proceed to page 3-51.
WinLink™ BRS Version
Note:
Both sites in a BRS Link must be configured identically.
Æ
To Configure BRS Channel Settings
1.
Set the Band Plan.
2.
Select the Bandwidth required,
Single Band (5 MHz)
Double Band (10 MHz)
Quad Band (20MHz)
3.
Select the Frequency from the pull-down menu.
4.
Click Next. The system is re-synchronized to the changes.
