Radwin RW 2000 Series, Руководство по установке, Страница: 22 / 127

Page 22 June 2023
Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com
Step Action Completed?
13. Connecting the ODUs to an External Antenna (if applicable)
14. Waterproofing
Commissioning
15. Connecting the ODUs
16. Checking Connectivity to the ODUs
17. Configuring ODUs as RT
‐
A(HBS)/Hubs
18. Activating the RT
‐
A (HBS)/Hub ODU
19. Aligning RT
‐
B(HSU) / SU / Client ODUs
3.2 Preparing a Laptop
Configure the laptop IP address and subnet mask as follows:
1. Control Panel
‐
> Network and Internet
‐
> Network and Sharing Center
‐
> Change
Adapter Settings
‐
> click Network Interface Card Name.
2. Properties
‐
> Select Internet Protocol Version 4 (TCP/IPv4)
‐
> Properties
‐
> set the
IP address to 10.0.0.100 and Subnet mask to 255.255.0
3. Alpha/EMB/INT/Ext products have a built-in WiFi AP. Connect to the ODU via its WiFi
AP as follows:
o
Unit ESSID: R [serial number of unit]
o
Default password: wireless.
4. On successful authentication, your WiFi client will receive a DHCP IP address.
5. To log in to the ODU, in a browser enter the WiFi AP IP address (default value:
192.168.1.1).
3.3 Connecting the Laptop to an ODU
Make sure you are using the appropriate PoE for your specific ODU.
1. Connect the PoE to a power source.
2. Connect an ethernet cable between the laptop ethernet port and the PoE IN or LAN
socket.
3. Connect the PoE OUT or PoE socket to the appropriate ODU socket.