
Page 76
June 2023
Corporate Headquarters | T. +972.3.766.2900 | E. [email protected] | www.radwin.com
4. Route the CAT
‐
5e and ground cables down from the ODU to a PoE.
It is recommended to route the CAT
‐
5e cable via 2 LPUs: one near the ODU and one
near the PoE.
5. Fasten the CAT
‐
5e cable connections with a gland and add sealant tape.
6. Connect the ground cable to the ground.
7. Perform the final connections via the RADWIN 2000 Alpha EMB PoE:
8. Connect the CAT
‐
5e cable from the lower LPU to the "PoE" port.
9. Connect the LAN cable to "LAN" port.
10. Connect the power cable.
3.12.3
Connecting RADWIN 2000 E ODUs
Connect the RADWIN 2000 E ODU as follows:
1. Connect an ethernet cable to the input port of the ODU as follows:
Note: If you are using a FO cable, connect it to the SFP port (labeled “LAN”).
Содержание RW 2000 Series
Страница 5: ...Page 5 June 2023 Corporate Headquarters T 972 3 766 2900 E sales radwin com www radwin com...
Страница 80: ...Page 80 June 2023 Corporate Headquarters T 972 3 766 2900 E sales radwin com www radwin com...
Страница 84: ...Page 84 June 2023 Corporate Headquarters T 972 3 766 2900 E sales radwin com www radwin com...