Radwin RW 2000 Series, Руководство по установке, Страница: 118 / 127

Page 118 June 2023
Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com
8. Release 4.9.75 Rev
0.8
Aug, 2020 Regulatory: Changed 3.4
‐
3.8 Alpha INT table to 2.4
9. Release 4.9.75 Rev
0.9
Feb, 2021 Grounding cable adjusted
Regulatory warning added for external antenna
connections including TG.
10. Release 5.1.10 Rev
1.0
Jun, 2021 New product: Alpha Connectorized
11. Release 5.1.30 Jan, 2022 Alpha GPS
12. Document version
12.0
Jun, 2023 New product: 2000 E
Changed document tracking from release to
document version
8.7 Regulatory Compliance
8.7.1
General Note
This system has achieved Type Approval in various countries around the world. This means
that the system has been tested against various local technical regulations and found to
comply. The frequency bands in which the system operates may be "unlicensed" and in
these bands, the system can be used provided it does not cause interference.
For information on the restrictions on putting the device into service please contact your
national telecommunication authorities.
8.7.2
FCC/ISED
‐
Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.