Radwin RW 2000 Series, Руководство по установке, Страница: 73 / 127

Page 73 June 2023
Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com
Figure 47 Input port: Alpha Connectorized ODU ("PoE IN")
2. Add sealant tape to the connections (see Waterproofing ).
3. Route the CAT
‐
5e and ground cables down from the ODU to a PoE.
It is recommended to route the CAT-5e cable via 2 LPUs: one near the ODU, and
one near the PoE.
4. Fasten CAT
‐
5e cable connections with a cable gland and add sealant tape.
5. Connect the ground cable to the ground.
6. Perform the final connections via a PoE depending on the type of PoE you are using,
as described below.
Indoor PoE
1. Connect the CAT
‐
5e cable from the lower LPU to the "Out" port.
2. Connect the LAN cable to the "In" port.
3. Connect the power cable.