Radwin 5000 HPMP, Руководство пользователя

Страница: 380 / 518

RADWIN 5000 HPMP User Manual Release 3.5.70 25 ‐ 5
What it Provides
On the managing computer, point your browser to10.104.50.200 and log on as shown below.
You can also log on over the air to registered HSUs in the same way.
For stand ‐ alone or unregistered HSUs, you must connect a managing computer directly to the
HSU and again log on as shown below.
What it Provides
The WI is a developing technology. It is possible that the current distributed release may have
additional or slightly different features from those shown here. The description below, should
nevertheless give you a good idea of how to use the WI.
Prerequisites
Hardware
You need a regular LAN connection between a managing computer and one of the sector
ODUs. The WI can be used directly opposite the HBS any of its HSUs. It can also be used over
the air from the HBS to any registered HSU.
The WI is available for RADWIN 2000 C and RADWIN 2000 B ODUs at release level 2.6.00 or
later along with RADWIN 5000 ODUs, from release 3.2.00 or later.
Table 25 ‐ 4:
Preconfigured setup - one nomadic HSU
Location Attribute Value Remark
HNU.01.01
IPv4
Address 10.104.50.3
All communicating HSUs and HBS in
the same subnet
Net Mask 255.255.0.0
Default Gateway 10.104.10.21
IPv6
Address 2005:104:50::3
Subnet Prefix Length 32
Default Gateway 2005:104:20::21
Protocol SNMPv1 Can be set to SNMPv3 or both v1
Contact Brahms Optional
Name Brahms@HNU.01.01 Location of Contact ‐ optional
Time Slots
Downlink 6
May vary with context
Uplink 2
Unit Serial Number P07030E000A0003B