Radware DefensePro 6.02, Руководство пользователя

Страница: 216 / 339

DefensePro User Guide
Bandwidth Management
216
Document ID: RDWR-DP-V0602_UG1201
Table 107: BWM Rule Parameters
Parameter Description
Identification
Name The user-defined name of the policy.
Values: 1–100,000
Note: This value is read-only after creation.
Index The index number of the policy.
Description A description of the policy.
Enable Policy Specifies whether the policy is enabled.
Values:
• Enabled—When BWM policies are updated, this policy is used to be
matched against packets.
• Disabled—When BWM policies are updated, this policy is not used
to be matched against packets.
Default: Enabled
Report Specifies whether the device issues traps for the rule.
Activate Schedule The Event Schedule for activation of the policy.
Note: The schedule must be configured already.
De-activate Schedule The Event Schedule for de-activation of the policy.
Note: The schedule must be configured already.
Classification
Source Network The source of the packets that the rule uses.
Values:
• A Network class displayed in the Classes tab
• An IP address
• any
Default: any
Destination Network The destination of the packets that the rule uses.
Values:
• A Network class displayed in the Classes tab
• An IP address
• any
Default: any
Port Group The Physical Port class or physical port that the rule uses.
Values:
• A Physical Port class displayed in the Classes tab
• The physical ports on the device
• None
Default: None