RADWAG PUE HX7, Руководство пользователя

Страница: 37 / 41

37
10.4. PROFIBUS Module
The PUE HX7 indicator can be equipped with PROFIBUS interface (option).
This requires installation of
AB6000 Anybus-IC
module (Elmark Automatyka)
in U1 socket of universal communication module board (385Rxxxx board, ver.
A).
Position of PROFIBUS module on 385Rxxxx board (ver.A)
The indicator is equipped with input and output connectors. On the output
connector there is 5 VDC voltage, this provides correct operation
of a terminator. Connectors of M12 5 pin B-code standard are used
(for PROFIBUS DP).
Pins arrangement
PROFIBUS IN
(male)
Pin1 – NC
Pin2 – A
Pin3 – NC
Pin4 – B
Pin5 – NC
PROFIBUS OUT
(female)
Pin1 - +5V
Pin2 – A
Pin3 – GND
Pin4 – B
Pin5 – NC