RADWAG PUE HX7, Руководство пользователя

Страница: 24 / 41

24
Scale with an indicator in a
metal housing connected
with a platform via a load
cell signal cable.
Scale of compact mechanical
design with an indicator in a
metal housing connected with
the platform via a post, etc.
Platform w/o galvanic connection
of the signal cable shield.
POINT C E
Platform with galvanic connection
of the signal cable shield.
POINT C POINT C
Point C
– threaded pin, galvanically connected with an indicator housing (for fixing of a ring
terminal),
E
– solder pad on
DP4 module.
9. FACTORY SETUP
To access and modify factory settings and parameters that are made available
for a user, run Factory Setup mode. Running Factory Setup mode enables the
technician to define the scale.
9.1. Factory Setup Access

Switch the weighing device off, to do it press key.
 Press and hold
SW1
switch located on the electronics board, while holding
the SW1 switch, press key to run the weighing device.
Factory Setup access switch