RADWAG PUE HX7, Руководство пользователя

Страница: 13 / 41

13
Optional Equipment
12IN/12OUT module 12IN/12OUT cable gland
AN analog output module 4 - 20 mA, 0 - 20 mA, 0 - 10 V
Profibus module 2 x M12 5P connector
RS485 M12 8P connector
RS232 x 2 M12 8P connector
5. INDICATOR INSTALLATION
5.1. Unpacking and Installation
A. Take the indicator out of the packaging.
B. Connect the indicator to a weighing platform, next place the weighing
device on a flat and even surface. Keep it far away from any sources of
heat.
C. It is necessary to level the scale, do it by turning its feet. Keep turning the
feet until the air bubble takes central position:
5.2. Start-Up

Plug the power cord to the mains.

Press key, it is to be found at the top of the operation panel.

Upon completed start-up, the home screen is displayed automatically.
5.3. Battery Status
Optional scale design features an internal battery. pictogram, displayed
at the top of the screen, either signals battery status or informs that battery
charging is in progress:

pictogram displayed in a cyclic manner: battery charging.

pictogram displayed continuously: battery charged within 75% -
100% range of permissible voltage,
 pictogram displayed continuously: battery charged within 50% - 75%
range of permissible voltage,

pictogram displayed continuously: battery charged within 25% - 50%
range of permissible voltage,