RADWAG PUE HX7, Руководство пользователя

Страница: 28 / 41

28
The above table presents menu structure for one platform.
When more than one platform are in use, enter <Factory
parameters> menu to see a list of all the platforms. Each
platform is defined by an analogous set of parameters
(presented above).
9.4. Return to Weighing
Introduced modifications are automatically recorded upon return to the home
screen. To return to the home screen:

press key repeatedly, keep pressing the key until you see the
home screen,

press key, the home screen is displayed immediately.
9.5. Scale Defining
Defining the device at the production stage requires entering basic scale
parameters: serial number, weighing device type.
Procedure:
 Enter
<Global / Scale defining>
submenu, message
<Continue?>
is displayed.
 Press key,
<Serial number>
edit box is displayed.
 Enter the serial number, do it using the operation panel.

Press key to confirm,
<Scale type>
list is displayed.

Select the scale, do it using the operation panel (refer to global
parameters table, section 9.2 of this manual).
 Press key to confirm,
<Global>
submenu is displayed.

Exit to the home screen, to do it press key repeatedly.
While defining scale type, additional parameters are set
automatically. These are among many battery type, filter
settings, etc.