RADWAG PUE HX5.EX, Руководство пользователя программного обеспечения

Страница: 75 / 96

75
•
Modification of ingredient settings is possible upon editing of the selected
ingredient, to do it press key to which (edit) pictogram is assigned.
When
1. you declare low deviation of value greater than the declared ingredient
mass then the following message is displayed:
<Value too high>
. Enter
correct low deviation value.
2. you declare high deviation of value greater than the declared ingredient
mass then the following message is displayed:
<Value too high>
. Enter
correct high deviation value.
•
Enter the required data and press button, the new ingredient
is added to the formulation.
•
Enter the last ingredient and go to the home screen, do it by pressing
key.
25.4. Formulation Procedure
•
Select the formulation, do it by pressing key to which (select
formulation) pictogram is assigned.
•
Save general parameters of 'Formulations' mode to scale memory,
the parameters are to be found upon pressing a key to which
pictogram is assigned.
•
Press key to which (process start) pictogram is assigned.
When:
1. The declared value of formulation multiplier causes exceeding of the max
capacity value, then the following message is displayed:
<Formulation
multiplier value too high>
. The process gets cancelled.
2. The declared value of ingredient mass exceeds the max capacity value,
then the following message is displayed:
<Ingredient mass value higher
than max capacity value>
. The process gets cancelled.
3. Sum of ingredient mass and high deviation values exceeds the max
capacity value, then the following message is displayed:
<High deviation
value too high>
. The process gets cancelled.
4. The weighing result is unstable then the following message is displayed:
<Unstable weighing result>
. The process status changes to
PS=Pause
and remains so until stable weighing result is obtained.