68
Permission to empty
Enter to send signal triggering the process of silos emptying
(e.g. opening of flap).
Chute delay [s]
Enter to set process end delay, counted from the moment
when mass value gets below the set
<Auto threshold>
value.
Record delay [s]
Enter to set delay of record of dosed mass after the dosing
threshold gets reached. The parameter value is declared in
[s], value range is 0 [s] (function inactive) - 300 [s].
Request cycles quantity
Enter to force query regarding number of dosing process
cycles, i.e. to specify how many times the whole process is to
be repeated.
Request mass
Enter to force query regarding value of mass that is to be
dosed after process start.
Automatic taring
Enter to enable/disable automatic taring at the moment
of dosing process start.
Dosing correction
Enter to correct the dosed mass, this function allows to
optimise the dosing process, change of pressure of dosed
material in the silos is accounted for. Parameters:
Constant
correction
– specifying global (constant) value of correction
to be applied during each process;
Maximum correction
–
specifying maximum value of correction, which can be
determined automatically during the process;
Measurements
quantity for correction calculation
– specifying how many
of the most recent measurements is to be analysed in order to
automatically calculate the correction during the process.
Readout
For detailed description read section 20.1.
Auto Threshold
For detailed description read section 20.3.
List of manual dosing functions
Min
Enter to set the value of low threshold of manual dosing.
Max
Enter to set the value of max threshold of manual dosing.
Confirm ingredients
manually
Mark to enforce manual confirmation of dosed mass by means of
pressing
key (the function is enabled for manual dosing mode).
Automatic taring
Enter to enable/disable automatic taring at the moment of dosing
process start.
Readout
For detailed description read section 20.1.
Auto Threshold
For detailed description read section 20.3.
Содержание PUE HX5.EX
Страница 1: ...PUE HX5 EX WEIGHING INDICATOR SOFTWARE MANUAL ITKP 01 04 12 18 EN...
Страница 2: ...2 DECEMBER 2018...
Страница 96: ...96...