RADWAG PUE HX5.EX, Руководство пользователя программного обеспечения

Страница: 69 / 96

69
24.3. Automatic Dosing Procedure
•
Save general parameters of Dosing mode to scale memory, the
parameters are to be found upon pressing a key to which pictogram is
assigned.
•
In case of selecting a product (that is to be dosed) form the database the
following message is displayed:
<Fast dosing threshold, dosing
threshold, dosing outputs, fast dosing outputs will be obtained from
the product data. Continue?>
( - press to select, - press to
cancel).
•
Press key to which pictogram (process start) is assigned, scale keypad
is locked except for - stop, - pause, - breakdown keys.
When:
1. Dosing outputs are declared incorrectly (e.g. lack of active dosing output)
the following message is displayed:
<Dosing outputs determined
incorrectly>
, next the process is cancelled.
2. Mass value on the weighing pan (in silos) is greater than declared
<Auto
threshold>
value or when the weighing result is unstable then the
following message is displayed:
Unstable weighing result or mass
above „Auto threshold”
. The process status changes to
PS=Pause
and
remains so until stable weighing result is obtained and/or weighing pan
emptied.
•
Upon process start, bar graph of dosed material mass is displayed with
the following data:
Top bar pictograms:
process in progress (blinking pictogram).