RADWAG PUE HX5.EX, Руководство пользователя программного обеспечения

Страница: 66 / 96

66
23.3. Reference Sample Mass Determined by Weighing
If the reference sample is to be weighed in a container, first put the container
on a weighing pan and tare it.
•
Press button (Determine reference sample mass), the following
message is displayed:
<Put reference sample>
.
•
Load the weighing pan with reference mass. When the indication is stable
( pictogram is displayed) press key to confirm the value.
•
Now (instead of weight value of the measured load) difference between
values of loaded mass and reference mass is displayed in [%].
23.4. Reference Sample Mass Entered to the Weighing Device Memory
•
Press button (Set part mass),
<Set reference sample mass>
edit box
featuring an on-screen keyboard is displayed.
•
Enter respective value and press key to confirm changes.
•
Now (instead of weight value of the measured load) difference between
values of loaded mass and reference mass is displayed in [%].
23.5. Setting Reference Sample Mass by Acquiring Mass of a Single Part
from Database
Upon selecting a product from database, reference sample mass of single part
assigned to the product (
<Reference sample mass>
entry) is entered
automatically.
Procedure:
•
Enter
<Percent weighing>
mode and press operation panel key to which
pictogram (products database) is assigned, next select given product
from the list.
•
Difference between values of loaded mass and reference mass assigned
to a selected product is displayed in [%].
24. WORKING MODE – DOSING
<Dosing> is a working mode enabling you to dispense product. Two options
are available, manual and automated dispensing.