RADWAG APP 10/2C, Руководство пользователя

Страница: 10 / 87

- 10 -
• Level the balance by turning its adjustable feet. Then using a wrench (3)
tighten up the nut (2) on the adjustable foot (1) to balance’s basis until
refusal point.
Setting
Before plugging to mains, level the balance using adjustable
feet. Turn the feet in a way that the air bubble of the level is
located centrally.
• Only then plug the balance to mains (power socket is located at the back
of balance’s housing).
4.3. Standard delivery components
• Balance.
• Weighing pan.
• Power adapter.
• User manual.
4.4. Cleaning
Balance should be cleaned with damp cloth by gentle wiping the smudges of
dirt. In order to clean the weighing pan of the balance, please remove it from
the weighing chamber.
Cleaning of the pan when assembled may cause
damage of the measuring system of the balance.
4.5. Plugging to mains
Balance can be plugged to mains only with a power adapter that comes
standard with the balance. Nominal power supply of the power adapter
(specified on the data plate of the power adapter) should be compatible to
the power from mains
. Plug the balance to mains – the plugging socket is
located at the back of balance’s housing. Balance display will light and show
name and number of software, after which balance will display 0.00g (in case
of balances with readability 0,01g) or 0.0g (for balances with readability 0,1g). .
If indication is other than zero, press
ZERO/TARE
key.