RADWAG APP 10/2C, Руководство пользователя

Страница: 76 / 87

- 76 -
15.3. Setting operation mode for RS 232 interface
no
-
manual operation (enabled on pressing
PRINT
key)
YES -
automatic operation (enabled on stabilization of weighing result).
Go back to weighing mode with procedure of saving changes
(see point - 8. 2. – return to weighing).
Automatic operation takes place according to the following scheme:

press
Esc/TARE
key to zero the balance (display will indicate
pictograms of stable measurement and precise zero )

place the load, balance will send first stable measurement through the
RS232 interface

remove the weighed load from the weighing pan,

next measurement can be conducted if a weighing result /- 50
reading units from zero (it is not necessary to reach precise zero to
start another measurement).