- 83 -
1 – 3
4
5
6
7
8 – 16
17
18 - 20
21
22
com
m
an
d
sp
ace
st
ab
ilit
y
m
ar
ker
sp
ace
si
gn
m
ass
sp
ace
uni
t
C
R
LF
Command
– 1 ÷ 3 characters
stability marker – [space] if stable
– [?] if unstable
– [^] if there is an error of range exceeding on +
– [v] if there is an error of range exceeding on -
sign
– [space] for positive values or [-] for negative values
mass
– 9 marks alignment to the right
unit
– 3 marks alignment to the left
17.
UNDER HOOK WEIGHING
In standard analytical and precision balances loads can be weighed under the
weighing pan. Such means of operation requires placing a balance on a uplifted
position.
For under hook weighing follow below procedure:
•
Place a balance on an optional rack enabling assembling a hook under
balance’s mechanism (opening in bottom section of balance’s housing) (the
rack does not come standard with a balance),
•
Remove plastic hole plug in basis of a balance,
•
There is suspension place for hook visible in the hole – the suspension is
installed permanently to balance mechanism,
•
In the opening install a dedicated weighing pan for under hook weighing (the
weighing pan for under hook weighing option does not come standard with a
balance),
•
Weigh loads using under hook weighing option,
•
On completing under hook weighing process, close the hole in balance basis
with plastic hole plug.
CAUTION:
The suspension for hook must not be turned, twisted or manipulated
in any direction. Such actions may cause damage to balance
mechanism.
Mass of all additional elements of under hook weighing kit, like: the hook,
weighing pan, string, etc. should be zeroed by pressing
Esc/TARE
key
.
Содержание APP 10/2C
Страница 2: ...2 NOVEMBER 2012...
Страница 22: ...22...
Страница 70: ...70...
Страница 71: ...71 Return to weighing mode...
