Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
In the Administrator settings tab, select Utilities > Remote access > AT Commands.
Figure 2-9
Configuring AT commands
Step 3
Set the fields as required.
Field Name
Description
AT commands
management
Enables/disables AT command API for remote control.
Enable all addresses
If set to Yes, enables access to the XT Codec Unit from any IP
address in a network. If set to No, configure Address and
SubNet mask.
Address
Enter the IP address allowed to access the system.
SubNet mask
Enter the SubNet mask associated with the IP address.
Step 4
Press Save.
Configuring the System for SNMP Management
Integration with SCOPIA iVIEW Management Suite allows remote monitoring, configuring,
upgrading and control features of SCOPIA XT Series endpoints, using SNMP (Simple Network
Management Protocol) and an AT command-based protocol on TCP/IP. In particular, these
features have been introduced:
RADVISION | Administrator Guide for SCOPIA XT4000 Series Version 3.0
Maintenance Tasks | 21
