Before you begin
During this procedure you need to enter the IP address and the subnet mask associated with
this IP address. Make sure you have this information. Contact your network administrator for
details if necessary.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
In the Administrator Settings tab, select Utilities > Remote Access > Download.
Figure 2-5
Enabling remote access to the SCOPIA XT Series
Step 3
Set the fields as required.
Table 2-3
Enabling remote upgrade
Field Name
Description
Download management Enables/disables downloading of firmware or patches to the XT
Codec Unit.
Enable all addresses
If set to Yes, enables access to the XT Codec Unit from any IP
address in a network. If set to No, configure Address and SubNet
mask.
Address
Enter the IP address allowed to access the XT Codec Unit.
SubNet mask
Enter the SubNet mask associated with the IP address.
Step 4
Press Save.
RADVISION | Administrator Guide for SCOPIA XT4000 Series Version 3.0
Maintenance Tasks | 17
