Performing Initial Configuration of the SCOPIA Elite MCU | 26
RADVISION | Installation Guide for SCOPIA Elite 5200 Series MCU Version 7.5
Step 5
Select Locate automatically to instruct the MCU to automatically locate one of the SIP servers
that are present in the domain,
or
Select Specify and enter the following:
•
An IP address or host name of the SIP server, for example <sipserver>.<company>.com.
Figure 4-5
SIP Protocol Section of the Protocols Tab
•
The communication port number of the SIP server address. The default port is 5060.
•
The transport connection type.
The default is UDP.
Figure 4-6
Type List
Note:
The Locate automatically option works only if you have configured a valid IP address at
Configuration > Setup > Network > DNS server1 or DNS server2.
Step 6
To instruct the MCU to register with a SIP registrar and to send service information to the registrar,
perform these steps:
a.
Select Use registrar.
