Performing Initial Configuration of the SCOPIA Elite MCU | 19
RADVISION | Installation Guide for SCOPIA Elite 5200 Series MCU Version 7.5
Step 12
Enter the subnet mask without leading zeros at the Enter IP Mask for default device prompt and
then press Enter.
If you are not using a subnet mask, press Enter.
Step 13
(Optional) Enter the IP address at the Secondary management address prompt and press Enter.
Note:
Do not use leading zeros in the IP address and ensure both IP addresses must be on the
same subnet.
Step 14
Press Enter at the Preferred DNS prompt.
Step 15
Press Enter at the Alternate DNS prompt.
Step 16
Press Enter at the DNS suffix prompt.
Step 17
Allow the unit to complete the reboot process. A new emulator session begins.
Step 18
Close the terminal emulator session.
Accessing the SCOPIA Elite 5200 Series MCU Administrator Interface
The MCU interface is available in these languages:
•
English
•
Chinese
•
Japanese
•
Portuguese
•
Spanish
•
Russian
The default language of the MCU interface is English. When you access the MCU interface, the
login screen is in English unless you choose a different language.
